An Introduction to the Resin Infusion Process

The resin infusion process is a process used in the composite field. The resin is used to fill any holes or gaps in material that may cause issues later on during the finishing process.

When you’re researching the resin infusion process, you might not be able to find a complete guide of how it works, but that ends now. Below you’re going to find everything that you need to know about the entire process and more.

Continue reading and we’re sure that everything you were looking for you’ll have found all in one place.

How- To Complete Resin Infusion

Resin infusion is also known as vacuum infusion. Before the process begins, you’ll need to collect the proper resin infusion supplies. The items that you will need to complete the process include:

  • Resin
  • Vacuum outlets
  • Pump to operate the vacuum
  • Desired Mold

Before proceeding, you need to understand that the equipment may take a few tweaks to ensure that it meets all of your needs.

Design Your Mold

First, craft the mold that you’re going to use. After creating the mold design, select the mediums that will be used to help resin flow through the mold correctly.

Consider the reinforcements that you will use to ensure that the mold is balanced and the end result is level.

Create a Vacuum Container

In the next step of the process, you will select the materials that you use to connect the resin feed to the vacuum attachments. The tubing that you choose to use should be wrapped in material to ensure easy removal.

After selecting materials, then a place will be needed where all of the excess resin will be emptied as vacuumed from the mold. You need to ensure the container you choose is large enough to support the resin. Therefore, being emptied into it without affecting the final resin infusion process.

Choose the Right Resin

The type of resin that you use during the infusion process is a matter of personal preference. And depending on the kind that you select will require more attention to detail than other forms.

After you’ve selected the resin that you want to use, you can begin the resin infusion process. Depending on the results that are achieved, you will make improvements as needed until you achieve the desired outcome.

Different types of resin have varying properties present in them that may change the decision that you make when selecting one.

Resin Infusion Done the Right Way

When it comes to performing resin infusion the right way, you’ve got to ensure that you select the right materials whether that means formaldehyde resin and have the right reinforcements before completing the process. The resin infusion process is just one area where your company may require outside sources’ expertise.

Here at SMI, we specialize in everything from pressure molding to tool construction. If you’re looking for someone to conquer a project challenge that you’ve got in mind, request a quote from SMI today.

About the author